Product details
Model Number: SK605-W
Brand Name: Eoutil
Key Specifications/Special Features:
SK605 Max 300 Watt 16 Power Plugs Remote Control Light SwitchesINSTRUCTIONSThe radio adapter plugs SK605 is suitable for switching electrical appliances on and off.Type SK605 is for outputs up to max.300W (ON/OFF).In using the hand-held remote control, the left-hand button starts, the right-hand button stop.NOTE
The button on the remote control unit must be held down until the appliance reacts to the switching command signal. This can take up to one second in duration to effect.
It is not suitable for electronic transformers, energy conservation lamps or fluorescent tube lighting.
INSTALLATION
Turn the main power switch off before installing.
If necessary, bracket screw holes on both sides
can be broken.
Connect the AC power and lighting or electrical
lines to the SK605 input and output. As shown
below.
INSTEAD FUSEPull out the fuse holder, remove the bad fuse and put a new fuse. As shown below.
CODING INSTRUCTIONS FOR REMOTECONTROL UNITS AND RECEIVERS
To keep matching with the remote control device, you must learn it.
Press learning key, red indicator light up, then release key.
Press any one ON key for remote control device, red indicator light flashes twice means you learning success.
LEARN AND CANCEL
THE CODEPress learning key, LED lights up, then you can check code or clear code. You have to quit from learning status, if you can’t received the message from remote control within 5S.
1. Press learning key, press any one ON key once the LED light flashes. If the LED flashes twice that it is completed. Following above process, learning the next button, you can only learn four keys at one time. You can use it when LED goes out.
2. You can only learn four keys at one time, if you want to learn more keys, you have to cancel one of those four keys. In order to cancel one of those keys, press the learning key. Press the OFF key that is associated with ON key when LED light up. When LED flashes twice means that the cancellation is completed.
3. Press learning key until LED flight flashes, then all keys will cancel.
The button on the remote control unit must be held down until the appliance reacts to the switching command signal. This can take up to one second in duration to effect.
It is not suitable for electronic transformers, energy conservation lamps or fluorescent tube lighting.
INSTALLATION
Turn the main power switch off before installing.
If necessary, bracket screw holes on both sides
can be broken.
Connect the AC power and lighting or electrical
lines to the SK605 input and output. As shown
below.
INSTEAD FUSEPull out the fuse holder, remove the bad fuse and put a new fuse. As shown below.
CODING INSTRUCTIONS FOR REMOTECONTROL UNITS AND RECEIVERS
To keep matching with the remote control device, you must learn it.
Press learning key, red indicator light up, then release key.
Press any one ON key for remote control device, red indicator light flashes twice means you learning success.
LEARN AND CANCEL
THE CODEPress learning key, LED lights up, then you can check code or clear code. You have to quit from learning status, if you can’t received the message from remote control within 5S.
1. Press learning key, press any one ON key once the LED light flashes. If the LED flashes twice that it is completed. Following above process, learning the next button, you can only learn four keys at one time. You can use it when LED goes out.
2. You can only learn four keys at one time, if you want to learn more keys, you have to cancel one of those four keys. In order to cancel one of those keys, press the learning key. Press the OFF key that is associated with ON key when LED light up. When LED flashes twice means that the cancellation is completed.
3. Press learning key until LED flight flashes, then all keys will cancel.
Shipping Information:
- FOB Port: Fuzhou
- Lead Time: 40 - 50 days
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe
